LTE-A Pro for 10x faster downlink speeds and 3x faster uplink speeds
Rugged, industrial-grade DIN Rail form factor
4-port 10/100/1000 Ethernet
Network connectivity via LTE, Ethernet, and USB 3.2
Enhanced Security with Two-Factor Authentication (2FA)
Giới thiệu
Tính năng kỹ thuật
Ứng dụng tiêu biểu
Download
The Perle IRG5140+ LTE Router has the most comprehensive set of features, functionality, and performance to provide primary or failover back-up connectivity to remote infrastructure and assets. This DIN Rail mountable, rugged, high-performance Cellular Router, with dual-SIM slots, is easily deployed with no need for training because of the intuitive web GUI. For advanced admin scrips, CLI commands are also available.
The IRG5140+ LTE Router provides fast and reliable network connectivity where wired options are impossible to deploy or require a backup. This is crucial for enabling a wide range of applications while ensuring the highest degree of security to protect the integrity of critical services. Reduce the cost of downtime and service calls, and bringing distributed sites online faster. With support for Data, SMS, Voice, and Video, the IRG5140+ can be integrated into any enterprise cloud, building, industrial, or mobile location network infrastructure.
Building and process automation controllers, Internet of Things (IoT)
Frequency Range: 704-902-928-960/1427.9-1575.42/1710-2170/2400-2480-2690MHz
Gain: 3 dBi
Impedance: 50 ohm
Voltage Standing Wave Ratio: <3.0 (typical)
Radiation: Omni-Directional
Connector: SMA Male (Swivel)
Dimensions: 135.6 x 20.1 mm / 5.34 x 0.8 in
SIM
Dual Mini-SIM 15 x 25mm (or 2FF )
GPS / GNSS
GPS / GNSS
Wide-band GNSS: 1559-1606 MHz
GPS: 1575.42 MHz / GLONASS: 1602 MHz / BeiDou: 1561.098 MHz / Galileo: 1575.42 MHz / QZSS: 1575.42 MHz
Simultaneous tracking: Up to 30 channels
Active GNSS antenna support
Reports: NMEA 0183 V3.0, TAIP
GPS / GNSS Passive Antenna
GNSS Applications: GPS, Glonass, Galileo, Beidou
Frequency Range: 1561MHz~1606 MHz
Gain: 4 dBi (typical)
Impedance: 50 Ohm
Voltage Standing Wave Ratio: 2.0 (typical)
Polarization: RHCP
SMA (M) straight
Dimensions: 41.9 x 47.3 x 16.3 mm / 1.65 x 1.86 x 0.64 in
RG-174 Cable Lenght: 5 m / 16.4 ft
10/100/1000 Mbps Ethernet RJ45 Copper
Ports
4 x 10/100/1000 Ethernet RJ45 Copper
Speed
Software selectable 10/100/1000 Ethernet, Auto
Software selectable Half/Full/Auto duplex
Ethernet Isolation
1.5Kv Magnetic
Standards
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow Control
Processing Type
Store and Forward
MAC Address Table Size
8K
VLAN ID range
1 to 4000
USB
USB-C
1 x USB 3.2 Type-C with a transfer rate up to 5Gbps
Configurable for Ethernet over USB
Power Connector
Two Digital Inputs
Type 3 isolated Digital Input & Pulse Counting VDC: 0 for ≤ 1V, 1 for ≥ 2.7V
One Alarm Relay
Normally Open (NO) dry contact: 1A @ 24VDC
Platform Specifications
Microprocessor
Dual Core ARM 1.2GHz
RAM
1GB DDR4
Flash
4GB MMC
LED Indicators
Power 1: indicates power status
Power 2: indicates power status
WWAN: indicates Wireless Wide Area Network status
GNSS: indicates Global Navigation Systems for GPS, Galileo, Glonas and Beidou status
Operating Temperature: -40°C to 70°C / -40°F to 158°F
Storage Temperature: -40°C to 85°C / -40°F to 185°F
Operating Humidity: 0% to 95% non-condensing
Storage Humidity: 0% to 95% non-condensing
Operating Altitude: 3048 m / 10,000 ft
Cooling: EN 60068-2-1
Dry heat: EN 60068-2-2
Damp: EN 60068-2-30
MTBF: > 287,215 hours (Calculation model based on MIL-HDBK-217-FN2 @ 30°C/86°F)
Heat Output (BTU/HR)
Enclosure
Aluminium
Mounting
DIN Rail (Mounts to standard 35 mm DIN rail in accordance with DIN EN 60175 vertically or horizontally)
Panel / wall mount attachement bracket is optional
Ingress Protection Rating
IP20
Power
Power Input
12/24/48 VDC Nominal (9.6 to 60 VDC Range) Dual Input
Power Connector
8-Pin Removable Terminal Block:
4-Pins for power
4-Pins for Alarm Relay and Digital Input
Power/Current Consumption
Standby (no activity / all ports shutdown): 3.9mA / 46.8mW
Idle Mode (connected/no Activity): 0.30A / 3.620W
Typical Use (connected/with Activity): 0.33A / 3.98W
Power Line Protection
Surge: 8KV (EN61000-4-5 common mode), 2KV (EN61000-4-5 differential and common modes)
Reverse polarity protection
YES
Weight & Dimensions
Product Weight & Dimensions
Weight: 0.38kg / 0.84lbs
Dimensions: 120 x 90 x 45 mm / 4.72 x 3.54 x 1.77 in