MODEL:
TGAR-1062+-4GS-M12
(Ngưng sản xuất)
Industrial EN50155 IEEE 802.11 a/b/g/n 4G LTE Cellular GPS Router With 2x10/100/1000Base-T(X), M12 connector
- Leading EN50155-compliant wireless access point for rolling stock application
- High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
- Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
- Secured Management by HTTPs
- Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE, Modem Dial Up
- IP table configurable to prevent access from unauthorized IP address
- Support VPN for secured network connection (Open VPN , PPTP VPN)
- Support NAT Setting (Virtual Server , Port Trigger , DMZ , UPnP)
- Support DHCP forwarding through PPTP function
- 4G LTE Modem dial up included
- GPS support for GPS model.
- 1KV isolation for PoE P.D. port for PoE model.
- Event Warning by Syslog, Email, SNMP Trap and Relay output
- Ultra rugged enclosure for toughest industrial usages
- Wall mounting enabled
- Giới thiệu
- Tính năng kỹ thuật
- Ứng dụng tiêu biểu
- Download
ORing's TransporterTM series cellular router is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TGAR-1062-4G-M12 is reliable IEEE802.11 a/b/g/n router with 2 ports LAN which is fully compliant with EN50155 certification. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Cellular modem dial up. Users can set up WLAN environment to fulfill demands of various applications rapidly by dialing up cellular modem. TGAR-1062-4G-M12 EN50155 cellular VPN router use M-series connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, TGAR-1062+-4G-M12 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification and TGAR-1062+-4GS-M12 supports GPS function. Therefore, TGAR-1062-4G-M12 is one of the most reliable choices for rolling stock applications on the wireless network.
Specifications |
|||
ORing EN50155 WLAN Access Point Router Model |
TGAR-1062-4G-M12 |
TGAR-1062+-4G-M12 |
TGAR-1062+-4GS-M12 |
Physical Ports |
|
||
10/100/1000Base-T(X) Ports in M12 Auto MDI/MDIX (8-pin A-coding) |
2 |
2(Present at ETH2 Fully compliant with IEEE 802.3af PoE P.D) |
|
DIDO port in M12 (5-pin A-coding) |
2(DI x 4 and DO x 4) : |
||
RS-232 Console port in M12(5-pin A-coding) |
115200, 8 ,N ,1 |
||
Relay port in M12 (5-pin A-coding) |
1A@24VDC |
||
SIM Card Slot |
1 |
||
GPS (-4GS model only) |
|
||
Antenna Connector |
1 x External reverse SMA antenna connector |
||
Frequency |
1575.42MHz |
||
WLAN Interface |
|
||
Antenna Connector |
2 x External reverse SMA-type antenna connector |
||
Radio Frequency Type |
DSSS, OFDM |
||
Modulation |
IEEE802.11a : OFDM with BPSK, QPSK, QAM, 64QAM |
||
Frequency Band |
America / FCC : 2.412~2.462 GHz (11 channels) |
||
Transmission Rate |
IEEE802.11b: 1 / 2 / 5.5 / 11 Mbps |
||
Transmit Power |
802.11a: 12dBm ± 1.5dBm |
||
Receiver Sensitivity |
802.11a: -68dBm ±2dBm@54Mbps |
||
Encryption Security |
WEP: (64-bit ,128-bit key supported) |
||
Wireless Security |
SSID broadcast disable |
||
Cellular Interface |
|
||
Cellular Standard |
GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA / HSPA+ / LTE |
||
Antenna Connector |
1 x SMA Female |
||
Band Option |
America(US) |
||
Protocol Support |
|
||
Protocol |
ARP, BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE |
||
LED Indicators |
|
||
Power Indicator |
2 x LEDs, |
||
10/100/1000Base-T(X) port Indicator |
2 x LEDs, Green for port Link/Act |
||
WLAN LED |
1 x LED, Green for WLAN Link/Act |
||
WAN LED |
1 x LED, Green for Cellular modem Link/ Act |
||
Fault Indicator |
1 x LED, Red for Ethernet link down or power down indicator |
||
Fault Contact |
|
||
Relay |
Relay output to carry capacity of 3A at 24VDC |
||
Power |
|
||
Redundant Input Power |
Dual Power Inputs. 12~48 VDC on M23 connector (24 VDC Typ.) |
||
Power Consumption (Typ.) |
9.5 Watts |
10.5 Watts |
10.7 Watts |
Overload Current Protection |
Present |
||
Reverse Polarity Protection |
Present |
||
Physical Characteristic |
|
||
Enclosure |
IP-40 |
||
Dimension (W x D x H) |
125.6(W) x 65(D) x 196.1(H) mm (4.94 x 2.55 x 7.72 inch.) |
||
Weight (g) |
968g |
977g |
977g |
Environmental |
|
||
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
||
Operating Temperature |
-25 to 70°C (-13 to 158°F) |
||
Operating Humidity |
5% to 95% Non-condensing |
||
Regulatory Approvals |
|
||
EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2) |
||
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
||
Shock |
IEC60068-2-27, EN61373 |
||
Free Fall |
IEC60068-2-31 |
||
Vibration |
IEC60068-2-6, EN61373 |
||
Rail Traffic |
EN50155 |
||
Cooling |
EN60068-2-1 |
||
Dry Heat |
EN60068-2-2 |
||
Safety |
EN60950-1 |