MODEL:
IGAR-2062+-4G
(Ngưng sản xuất)
Industrial IEEE 802.11 a/b/g/n Dual 4G LTE Cellular Router with 2x10/100/1000Base-T(X)
- High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
- Provide 2 port 10/100/1000Base-T(X) port and 2 sim card slot
- Support dual 3.5G HSDPA dial up backup and land balance
- Provide HNAT enhance LAN to WAN routing performance
- Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
- Secured Management by HTTPs
- Support STP(802.1D) for wireless redundancy
- Various kind of WAN Connection Type supported: Dynamic/Static IP, PPPoE, Modem/Dial Up
- Support client operating mode
- Versatile modes & event alarm by e-mail
- 1KV isolation for PoE P.D. port
- Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
- Rigid IP-30 housing design
- DIN-Rail and Wall-mount enabled
- Giới thiệu
- Tính năng kỹ thuật
- Ứng dụng tiêu biểu
- Download
IGAR-2062+-4G is a reliable IEEE 802.11 a/b/g/n WLAN VPN router with 2 ports 10/100/1000Base-T(X) router where ETH1 for LAN and ETH2 for WAN. It supports 802.1X and MAC filter for security control. It could be configured to operate in 3 modes of routing function: Dynamic/Static IP route, PPPoE authentication, and Modem dial up. In the mode of Modem dial up, it support GPRS/3G/3.5G/LTE modem by internal cellular module. Users can set up WLAN environment to fulfill demands of various applications rapidly by dual SIM dialing up cellular modems. In addition, IGAR-2062+-4G provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. This feature extends the layout up to 100 meters. Therefore, IGAR-2062+-4G is one of the best solution for applications of wireless communication.
Specifications |
|
ORing AP Model |
IGAR-2062+-4G |
Physical Ports |
|
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX |
2 |
5-Pin Terminal Block |
2(DI x 4 and DO x 4) : |
PoE P.D. Port |
Present at ETH2 |
Sim Card Slot |
2 |
Cellular Interface |
|
Antenna Connector |
2 x SMA Female |
Cellualr Standard |
GSM / GPRS/ EGPRS/ EDGE / WCDMA / HSDPA / HSUPA /HSPA+ / LTE |
Band Option |
America(US grade) |
WLAN Interface |
|
Antenna Connector |
2 x Reverse SMA Female |
Modulation |
IEEE802.11b: CCK/DQPSK/DBPSK |
Frequency Band |
America / FCC: |
Transmission Rate |
802.11b: 1/2/5.5/11 Mbps |
Transmit Power |
802.11a: 12dBm ± 1.5dBm@ |
Receiver Sensitivity |
802.11a : -76dBm ± 2dBm@54Mbps |
Encryption Security |
WEP: (64-bit ,128-bit key supported) |
Wireless Security |
SSID broadcast disable |
LED Indicators |
|
Power Indicator |
3 x LEDs, PWR1(2)(PoE) / Ready: |
10/100/1000Base-T(X) RJ45 Port Indicator |
2 x LEDs, |
WLAN LEDs |
Green Solid On: RF on, Blink: data transmitting |
WAN LEDs |
2 x LEDs, Green On : Power is on and functioning Normal |
Fault |
1 x LED, Red for Ethernet link down or power down indicator |
Fault Contact |
|
Relay |
Relay output to carry capacity of 1A at 24VDC |
Power |
|
Redundant Input Power |
Dual DC inputs. 12-48VDC on 6-pin terminal block |
Power Consumption (Typ.) |
15 Watts |
Overload Current Protection |
Present |
Reverse Polarity Protection |
Present |
Physical Characteristics |
|
Enclosure |
IP-30 |
Dimensions (W x D x H) |
74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.) |
Weight (g) |
1155 g |
Environmental |
|
Storage Temperature |
-40 to 85°C(-40 to 185°F) |
Operating Temperature |
-25 to 70°C(-13 to 158°F) |
Operating Humidity |
5% to 95% Non-condensing |
Regulatory Approvals |
|
EMI |
FCC Part 15, CISPR (EN55022) class A |
EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
Shock |
IEC60068-2-27 |
Free Fall |
IEC60068-2-31 |
Vibration |
IEC60068-2-6 |
Safety |
EN60950-1 |