IMC-P111P Series: Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket

IMC-P111P Series, Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socketoring, oringnet.vn,hoàng vân, hoàng vân co, hoangvanco,TIN HỌC HOÀNG VÂN, industrial switch, soatvetudong, e-ticket

IMC-P111P Series: Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket

IMC-P111P Series Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket , Công ty TNHH Công Nghệ và Tin học Hoàng Vân

Công ty TNHH Công Nghệ và Tin học Hoàng Vân chuyên IMC-P111P Series Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket tốt nhất thị trường

Chi tiết sản phẩm

Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket

MODEL:

IMC-P111P Series

(Ngưng sản xuất)

Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket

Designed for Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613
Leading EN50155-compliant Ethernet switch for rolling stock application
Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to fiber or Ethernet to SFP port
Support LFP (Link Fault Pass-through) function
Supports full/half duplex operation
Supports store and forward transmission
Supports relay output for power failed alarm
Provided DIP-Switch to setting function
High reliability and rigid IP-30 housing
DIN-Rail and wall mounting enabled

Giới thiệu
Tính năng kỹ thuật
Ứng dụng tiêu biểu
Download

IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85°C and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments. IMC-P111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-P111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.

IMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the IMC-111 series is reliable media converter and can satisfy most demand of operating environment.

Specifications
ORing Switch Model	IMC-P111FX-MM	IMC-P111FX-SS	IMC-P111P
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX	1	1	1
Fiber Ports Number	1	1	-
Fiber Ports Standard	100Base - FX	100Base - FX	-
Fiber Mode	Multi-mode	Single-mode
Fiber Diameter (μm)	62.5/125 μm 50/125 μm	9/125 μm	-
Fiber Optical Connector	SC	SC	-
Typical Distance (km)	2 km	30 km	-
Wavelength (nm)	1310 nm	1310 nm	-
Max. Output Optical Power (dBm)	-14 dBm	-8 dBm	-
Min. Output Optical Power (dBm)	-23.5 dBm	-15 dBm	-
Max. Input Optical Power(Saturation)	0 dBm	0 dBm	-
Min. Input Optical Power (Sensitivity)	-31 dBm	-34 dBm	-
Link Budget (dB)	7.5 dB	19 dB	-
100Base-FX SFP port	-	-	1
Technology
Ethernet Standards	IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control
Processing	Store-and-Forward
DIP-Switch setting	DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power Indicator	Green : Power LED x 3 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator	Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down Amber for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator	Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down Amber for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP status indicator	Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Fault indicator	Amber : Indicate unexpected event occurred
Duplex indicator	Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
Power
LV Model Input Power	Triple DC inputs. Dual 12~48VDC on 7-pin terminal block, one 12~45VDC on power jack
HV Model Input Power	Dual 100~240VAC power inputs on 8-pin terminal block
Power consumption (Typ.)	LV model : 12 Watts, HV model : 100VAC/4.8Watts, 240VAC/5.8Watts	LV model : 12 Watts HV model : 100VAC/4.8Watts, 240VAC/5.8Watts	LV model : 12 Watts HV model : 100VAC/4.8Watts, 240VAC/5.8Watts
Overload Current Protection	Present
Reverse Polarity Protection	Present on terminal block
Physical Characteristics
Enclosure	IP-30
Dimensions (W x D x H)	52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g)	LV model : 660 g HL model : 802 g	LV model : 660 g HL model : 802 g	LV model : 650g HV model : 792g
Environmental
Storage Temperature	-40 to 85°C (-40 to 185°F)
Operating Temperature	-40 to 85°C (-40 to 185°F)
Operating Humidity	5% to 95% Non-condensing
Regulatory Approvals
Power Automation	IEC 61850-3, IEEE 1613
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock	IEC60068-2-27
Free Fall	IEC60068-2-32
Vibration	IEC60068-2-6
Safety	EN60950-1

Order information

Model Name	Description
IMC-P111P-HV_EU	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-HV_JP	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-HV_UK	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-HV_US	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-LV	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-M12-HV_EU	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-M12-HV_JP	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-M12-HV_UK	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-M12-HV_US	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket
IMC-P111P-M12-LV	Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) M12 connector to 1x100Base-FX fiber or 1x100Base-FX SFP socket